RDC6445GT

 Support up to channels of servo/stepping motor control

Support 1 way extended serial port, which can communicate with EPLC-400. wireless
handheld devices (BWK201R, BWK301R), and other devices with RS232 standard interface.
Support 4 OC gate outputs, which can directly drive 5v/24 relays
Support mobile APP
Support double-head electric mutual movement control and over-format cutting
Support double-head- asynchronous processing
Support processing methods such as large format vision, mark pont vision cutting and
projection cutting
Support controller and HMI firmware updating by U disk
Startup screen can be upgraded through software

Check On Aliexpress

Parameter

  1. 4 motor interfaces, maximum output is 400KHZ frequency:
    drive capacity 20MA. common anode interface
  2. Onboard 128M memory.
  3. The maximum USB transfer rate is 12M, and the longest distance is 5 meters.
  4. The maximum transmission rate of the network cable is 100M,
    and the maximum transmission distance is 200M;
  5. Linear/arc/B-spline interpolation accuracy +/-0.5 pulse.
    6.4 general photoelectric isolation OC gate output, maximum 300ma drive capability
    (with continuous current protection), can directly drive 24V/5V DC relay.
    7.4 general optical isolation inputs, compatiblev5v/2v24V4 logic level

Size

Software

Diagram

Certification

RDC6445GT5-Laser-cutting-system-hardware-user-manualV1.1Download
RDC6445GT7-Laser-cutting-system-hardware-user-manualV1.0Download

Comments

Post a Comment

Popular posts from this blog

RDC6432G

Image
  The RDC6432G system is the latest laser engraving cutting control system. True color TFT screen, man-machine operating system.1-way independent adjustable laser power control.Multi-channel general dedicated IO control. Better and better motion control functions. Check On Aliexpress Check On eBay Parameter Digital laser control signal; TTL level output, 50ma drive capability; The PWM frequency is adjustable from 2K to 50K; PWM duty cycle is adjustable from 1% to 99% Motor control signal OC output, 300ma drive capability Motor control pulse frequency is up to 500KHZ; USB maximum transmission rate of 12M the longest distance of 5 meters; Linear/ circular/b- -spline interpolation accuracy+-0.55 pulse Size Software RDWorks V8 Diagram Certification Software and Manual RDWorks V8 Setup 8.01.54-20210513 RDC6432G-control-system-user-manual-V1.1 Download Ruida-RDC6432G-Wiring-Diagram Download
Read more

RDLC320-A

Image
  RDLC320-A is a controller especially for laser engraving/cutting,based on floating 32-bit DSP+FPGA architecture with high performance.It can finish large-scale complex motion control algorithm to achieve the continuous path control and position control of multi-axis movement,and energy tracking control,keeping the laser energy balance at any speed point.Large-scale logical gate array FPGA can complete the complex communication protocol and flexible IO extension.Fast communicate transmission and easy to operate. Check On Aliexpress Check On Ebay Parameter 1,Digital laser control signals 1,Differential output,TTL level,20mA,drive capability PWM frequency 2.5K-50K for adjustable PWM duty ratio is 2%-98%,adjustable PWM value is up to 4.5V Analog laser control signal:0-5V tracing adjustable automatically Motor control signal;differential output,TTL level,drive capability 20mA Motor control pulse frequency:Max 400KHZ USB:Max transmission rate is 12Mbps;;the longest distance is 5 meters Int
Read more