Ruida 6445G-Mod5

 

Features

Support up to 4 servo stepper motor control;
Supports one extended serial port, which can communicate with EPLC-400, wireless
handheld devices( BWK301R), and other devices with RS232 standard interface;
124 relay
■ Support4 OC gate outputs, can directly drive5v
Support panel button function customization;
Support dual-head electric mutual shift control and super-format split cutting processing:
■ Support dual-head- asynchronous processing
Support large format vision, mark point visual cutaing and projection cutting and other
processing methods;

Check On Aliexpress

Check On eBay

  • 4-way motor interface, output maximum 400KHZ frequency; drive capacity 20MA,common anode interface;
  • On-board 128M non-releasable memory;USB maximum transfer rate is 12M, the longest distance is 5 meters:
  • The maximum transmission rate of the network cable is 100M, and the maximum transmission distance is 200M 
  • Linear/ circular/b-spline- interpolation accuracy +/-0.5 pulse 
  • 4 general-purpose opto-isolated OC gate outputs, with a maximum driving capacity of 300ma(with freewheel protection), can directly drive 24V /5V DC relays;
  • 4 universal photoelectric isolation inputs,compatible with 5V /12V /24V logic level;

Size

Multi-Language

Diagram

Software

Certification

Software and Manual

RDWork-Laser-Engraving-Cutting-Software-V1.3Download
RDWorksV8_Software_ManualDownload

RDWorks V8 Setup 8.01.54-20210513

Comments

Post a Comment

Popular posts from this blog

RDC6432G

Image
  The RDC6432G system is the latest laser engraving cutting control system. True color TFT screen, man-machine operating system.1-way independent adjustable laser power control.Multi-channel general dedicated IO control. Better and better motion control functions. Check On Aliexpress Check On eBay Parameter Digital laser control signal; TTL level output, 50ma drive capability; The PWM frequency is adjustable from 2K to 50K; PWM duty cycle is adjustable from 1% to 99% Motor control signal OC output, 300ma drive capability Motor control pulse frequency is up to 500KHZ; USB maximum transmission rate of 12M the longest distance of 5 meters; Linear/ circular/b- -spline interpolation accuracy+-0.55 pulse Size Software RDWorks V8 Diagram Certification Software and Manual RDWorks V8 Setup 8.01.54-20210513 RDC6432G-control-system-user-manual-V1.1 Download Ruida-RDC6432G-Wiring-Diagram Download
Read more

RDLC320-A

Image
  RDLC320-A is a controller especially for laser engraving/cutting,based on floating 32-bit DSP+FPGA architecture with high performance.It can finish large-scale complex motion control algorithm to achieve the continuous path control and position control of multi-axis movement,and energy tracking control,keeping the laser energy balance at any speed point.Large-scale logical gate array FPGA can complete the complex communication protocol and flexible IO extension.Fast communicate transmission and easy to operate. Check On Aliexpress Check On Ebay Parameter 1,Digital laser control signals 1,Differential output,TTL level,20mA,drive capability PWM frequency 2.5K-50K for adjustable PWM duty ratio is 2%-98%,adjustable PWM value is up to 4.5V Analog laser control signal:0-5V tracing adjustable automatically Motor control signal;differential output,TTL level,drive capability 20mA Motor control pulse frequency:Max 400KHZ USB:Max transmission rate is 12Mbps;;the longest distance is 5 meters Int
Read more